logo

讲座

研讨会/课程

会议

摘要清单
86
Bionic superhydrophilic polyether ether ketone (PEEK) surface by femtosecond laserAbstract Accepted

Qin Yang*

#1.Surface Micro-Nnao fabrication and Additive Manufacturing

85
Icing delay of water droplets on superhydrophobic titanium alloy surfaces prepared by nanosecond laserAbstract Accepted

Chunfang Guo*, Meiju Zhang, Jun Hu

#1.Surface Micro-Nnao fabrication and Additive Manufacturing

84
Plasma diagnosis revealing the nitrogen deficiency in Cr-N coatings deposited by reactive HiPIMSAbstract Accepted

宇星 祁, 爱英 汪*

#2.Thin Film Technologies and Applications

83
Effect of multiple alloying on microstructure and abrasion resistance of laser cladding nickel-based alloy coatingsAbstract Accepted

灿明 王*

#1.Surface Micro-Nnao fabrication and Additive Manufacturing

82
Study on Piezoresistive Behavior of Amorphous Carbon Films and Their Application in MEMS Force Sensor and Stretchable Strain SensorAbstract Accepted

Guo Peng, Aiying Wang*

#3.Nano-materials and Nano-coatings

81
晶粒屈服各向异性导致金属薄膜中异常织构演化Abstract Accepted

祖敏 王*

#3.Nano-materials and Nano-coatings

80
Effect of Gd2O3 and Yb2O3 Doping on the Microstructure and Properties of ZrO2Abstract Accepted

培虎 高*, 圣聪 曾

#4.Other Surface Coating Technologies

79
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Plasma Cladded CoCrFeNiMn Coatings on CGIAbstract Accepted

培虎 高*, 瑞涛 付

#3.Nano-materials and Nano-coatings

78
Research on the Microstructure and Properties of tin bronze Coatings Prepared on the surface of TA17 titanium alloy through Plasma Transfer Arc CladdingAbstract Accepted

培虎 高*, 国栋 党

#1.Surface Micro-Nnao fabrication and Additive Manufacturing

77
Influence of Plasma Arc Currents on the Microstructure and Properties of Stellite-20 alloy coatings through Plasma CladdingAbstract Accepted

培虎 高*, 起保 李

#3.Nano-materials and Nano-coatings

76
A Novel Spraying Strategy to Improve the Thermal Insulation of Thermal Barrier CoatingsAbstract Accepted

培虎 高*, 灿 金

#4.Other Surface Coating Technologies

75
Influence of erbium addition on the crack defect of selective laser melted 7075 aluminum alloyAbstract Accepted

旭辉 张, 文慧 于*

#1.Surface Micro-Nnao fabrication and Additive Manufacturing

74
Preparation and Photocatalytic Performance of Ag/ZnO NanocompositesAbstract Accepted

政皓 王, 永玲 吴, 立勇 王, 宏宇 郑*

#3.Nano-materials and Nano-coatings

73
Degradation of amorphous carbon films/stainless steel bipolar plates in proton exchange membrane fuel cellsAbstract Accepted

昊 李, 鹏 郭, 爱英 汪*

#2.Thin Film Technologies and Applications

72
Enhancement of antibacterial function by incorporation of silver-doped ZnO nanocrystals onto laser-induced graphene surfaceAbstract Accepted

立勇 王, 宏宇 郑*

#3.Nano-materials and Nano-coatings

重要日期

  • 会议日期

    12-03

    2021

    至

    12-05

    2021

  • 07-25 2021

    Early Bird Registration

  • 12-01 2021

    Draft paper submission deadline

  • 12-03 2021

    Registration deadline

主办单位

中国机械工程学会表面工程分会

承办单位

山东理工大学

联系方式
历届会议

表面工程在线是由中国机械总院集团武汉材料保护研究所有限公司组建的一个面向我国表面工程行业的服务性平台，平台得到了中国机械工程学会表面工程分会、中国机械工程学会摩擦学分会、中国腐蚀与防护学会以及国内众多科研院所和高校等组织机构的大力支持。平台有能力整合多方资源，愿为我国表面工程行业的蓬勃发展贡献力量！